Smart Home Temperature/Humidity Sensor Manual

Welcome!

Thank you for supporting my small business. With any problem, you can contact me via the live chat button here. 

Smart Home Temperature/Humidity Sensor Manual Guide:

1. Connect the Smart Home Temperature Sensor to power via USB-C cable.
   
   
   
2. The Smart Home Temperature Sensor will transmit a hot spot. Go to your phone's Wi-Fi settings and search for a Wi-Fi hotspot called "Smart-Temperature-Sensor", and connect to it.
   
   
   
   
3. After connecting to the hotspot, a website should open automatically.  If that doesn't happen, open your browser and go to the following address: 192.168.4.1
   and a Wi-Fi configuration page for The Smart Home Temperature Sensor.
   
   Choose your wifi network name and enter your wifi password; the device will disconnect from your phone and try to connect to your wifi.

IF you put in the wrong wifi passowrd and the sensor cannot connect to the wifi network you choose, after about 5 minutes the sensor will fall back to the hotpot and you will be able to connect to the sensor again to change the wifi settings.

        4.  Go to your Home Assistant Page - Settings - Devices & Services 
             And the new sensor should be automagically discovered, press Add, and follow                   Home Assistant's instructions.

       5. Now, under Devices & Services - ESPHOME : 
           You should see the new sensor; you need to change the offset for the calibration                 process. The values that I find to be the best are:

                                Temperature:      -4.1              Humidity:       +11

           But you can change them to whatever works for you.

And that's it! I hope you will enjoy your new Smart Home Temperature/Humidity Sensor.